ACC 601-70-H419

ACC 601-70-H419

Group Assignment 1 (80 Points)

Don't use plagiarized sources. Get Your Custom Essay on
ACC 601-70-H419
Just from $13/Page
Order Essay

Specific Instructions:

1. As a group, Complete this assignment in good form. Use excel or word only. Provide all supporting calculations to show how you arrived at your numbers.

2. Add only the names of group members who participated in the completion of this assignment. Do not forget to include the participants names. If the participants names are not listed, the grade for participants will result in zero.

3. Submit only one copy of your completed work via Moodle. Do not sent it via email.

4. Due: Sunday, February 2 at 11:00 PM EST. Late submissions will not be accepted.

Part A-1: Application of Job Order Costing

“Blast it!” said David Wilson, president of Teledex Company. “We’ve just lost the bid on the Koopers job by $3,000. It seems we’re either too high to get the job or too low to make any money on half the jobs we bid.”

Teledex Company manufactures products to customers’ specifications and uses a job-order costing system. The company uses a plantwide predetermined overhead rate based on direct labor cost to apply its manufacturing overhead (assumed to be all fixed) to jobs. The following estimates were made at the beginning of the year:

Department

Fabricating

Machining

Assembly

Total Plant

Manufacturing overhead

$

355,250

$

406,000

$

91,350

$

852,600

Direct labor

$

203,000

$

101,500

$

304,500

$

609,000

Jobs require varying amounts of work in the three departments. The Koopers job, for example, would have required manufacturing costs in the three departments as follows:

Department

Fabricating

Machining

Assembly

Total Plant

Direct materials

$

3,300

$

200

$

1,700

$

5,200

Direct labor

$

3,400

$

500

$

6,500

$

10,400

Manufacturing overhead

?

?

?

?

Required:

1. Using the company’s plantwide approach:

a. Compute the plantwide predetermined rate for the current year.

b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job.

2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions:

a.Compute the predetermined overhead rate for each department for the current year.

b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job.

4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead).

a.What was the company’s bid price on the Koopers job using a plantwide predetermined overhead rate?

b.What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost?

Part A-2: Schedules of Cost of Goods Manufactured and Cost of Goods Sold; Income Statement

Superior Company provided the following data for the year ended December 31 (all raw materials are used in production as direct materials):

Selling expenses

$

216,000

Purchases of raw materials

$

264,000

Direct labor

?

Administrative expenses

$

159,000

Manufacturing overhead applied to work in process

$

368,000

Actual manufacturing overhead cost

$

355,000

Inventory balances at the beginning and end of the year were as follows:

Beginning of Year

End of Year

Raw materials

$

51,000

$

33,000

Work in process

?

$

32,000

Finished goods

$

34,000

?

The total manufacturing costs for the year were $675,000; the cost of goods available for sale totaled $735,000; the unadjusted cost of goods sold totaled $669,000; and the net operating income was $32,000. The company’s underapplied or overapplied overhead is closed to Cost of Goods Sold.

Required:

Prepare schedules of cost of goods manufactured and cost of goods sold and an income statement. (Hint: Prepare the income statement and schedule of cost of goods sold first followed by the schedule of cost of goods manufactured.)

Part B-1: Process Costing using Weighted Average

“I think we goofed when we hired that new assistant controller,” said Ruth Scarpino, president of Provost Industries. “Just look at this report that he prepared for last month for the Finishing Department. I can’t understand it.”

Finishing Department costs:

Work in process inventory, April 900 units; materials 100% complete; conversion 60% complete

$

8,561

*

Costs transferred in during the month from the preceding department, 2,400 units

25,381

Materials cost added during the month

10,017

Conversion costs incurred during the month

21,750

Total departmental costs

$

65,709

Finishing Department costs assigned to:

Units completed and transferred to finished goods, 2,700 units at $24.340 per unit

$

65,709

Work in process inventory, April 30, 600 units; materials 0% complete; conversion 50% complete

0

Total departmental costs assigned

$

65,709

*Consists of cost transferred in, $4,286; materials cost, $2,025; and conversion cost, $2,250.

“He’s struggling to learn our system,” replied Frank Harrop, the operations manager. “The problem is that he’s been away from process costing for a long time, and it’s coming back slowly.”

“It’s not just the format of his report that I’m concerned about. Look at that $24.340 unit cost that he’s come up with for April. Doesn’t that seem high to you?” said Ms. Scarpino.

“Yes, it does seem high; but on the other hand, I know we had an increase in materials prices during April, and that may be the explanation,” replied Mr. Harrop. “I’ll get someone else to redo this report and then we can see what’s going on.”

Provost Industries manufactures a ceramic product that goes through two processing departments—Molding and Finishing. The company uses the weighted-average method in its process costing.

Required:

1-a. Calculate the equivalent units of production.

1-b. Calculate the cost per equivalent unit.

1-c. How much cost should have been assigned to the ending work in process inventory?

1-d. How much cost should have been assigned to the units completed and transferred to finished goods?

Part B-2: Break-Even Analysis

Cheryl Montoya picked up the phone and called her boss, Wes Chan, the vice president of marketing at Piedmont Fasteners Corporation: “Wes, I’m not sure how to go about answering the questions that came up at the meeting with the president yesterday.”

“What’s the problem?”

“The president wanted to know the break-even point for each of the company’s products, but I am having trouble figuring them out.”

“I’m sure you can handle it, Cheryl. And, by the way, I need your analysis on my desk tomorrow morning at 8:00 sharp in time for the follow-up meeting at 9:00.”

Piedmont Fasteners Corporation makes three different clothing fasteners in its manufacturing facility in North Carolina. Data concerning these products appear below:

Velcro

Metal

Nylon

Annual sales volume

95,000

216,000

320,000

Unit selling price

$

1.90

$

1.30

$

0.90

Variable expense per unit

$

0.70

$

0.70

$

0.70

Total fixed expenses are $262,000 per year.

All three products are sold in highly competitive markets, so the company is unable to raise prices without losing an unacceptable numbers of customers.

The company has an extremely effective lean production system, so there are no beginning or ending work in process or finished goods inventories.

Required:

1. What is the company’s over-all break-even point in dollar sales?

2. Of the total fixed expenses of $262,000, $34,200 could be avoided if the Velcro product is dropped, $96,000 if the Metal product is dropped, and $38,800 if the Nylon product is dropped. The remaining fixed expenses of $93,000 consist of common fixed expenses such as administrative salaries and rent on the factory building that could be avoided only by going out of business entirely.

a. What is the break-even point in unit sales for each product?

b. If the company sells exactly the break-even quantity of each product, what will be the overall profit of the company?

Place your order
(550 words)

Approximate price: $22

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read more

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read more

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read more

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more
Live Chat+1(978) 822-0999EmailWhatsApp